Skip to main content

CBM Calculator

Calculate the total volume of your shipment in cubic meters and cubic feet.

Enter one row per size and gross weight. Measure each packed unit at its widest points, including any pallet or overhang.

Choose units before entering measurements. Changing a unit converts this row’s existing values.

Package type 1
1 of 50 rows
Import or export package rows

Paste comma- or tab-separated rows in the order below. A header is optional. Leave unused weight fields blank. Import replaces the list after all rows pass validation.

Description, Length, Width, Height, Unit, Quantity, Gross weight per package, Weight unit

Shipment total

Edit packages ↑

Enter the outside dimensions and quantity of at least one package type.

Enter the outside dimensions and quantity of at least one package type.

Entries aren’t saved automatically. Export your package rows or copy the summary before leaving.

How to calculate CBM for a shipment

A shipment of eight small cartons and three larger ones has 11 pieces, but the piece count alone says little about the space they occupy. CBM, short for cubic meters, expresses their combined packed volume in one measurement. Enter each distinct type above and the calculator multiplies its volume by its quantity, then combines the rows. The result also gives cubic feet and, if you enter weights, the gross weight covered by those entries.

Step 1

Measure the packages as they will ship.

Close the cartons, secure any wrapping, and measure the longest outside span in each direction. Record length, width, and height in the same unit for each row.

Step 2

Group identical pieces.

Enter one row for pieces with the same outside measurements and gross weight per piece. Use Quantity to record how many there are. Add a row when a size or weight changes, even if the box style looks the same.

Step 3

Check the totals against the packing list.

Compare the package count first, then review the cubic meters and any gross weight. Open the shipment summary to share the total together with the measurements behind it.

Measure the handling unit that actually ships

Use the finished shipment’s outside measurements. A supplier’s carton size may describe the inside space available for packing. Board thickness, closed flaps, and anything that extends past a wall can make the outside measurements different. Put the packed item on a level surface and measure between the farthest points along each axis. With an irregular package, use the outside dimensions of the rectangular space it occupies, including projections.

Count a loaded pallet as one unit when it will be picked up and handled as a single piece. Measure the length and width across the full load, including any cartons that overhang the pallet. Measure height from the floor to the highest point of the secured load. The pallet, wrap, and packaging also belong in its gross weight. For two loaded pallets measuring 120 × 80 × 150 cm and weighing 320 kg each, enter a quantity of two. The result is 2.88 m³ and 640 kg across two units. The cartons already on those pallets are included in those measurements.

For a mix of a loaded pallet and loose cartons, make one row for the pallet and separate rows for the loose carton types. The package count should match the pieces the carrier receives. Use labels such as “Pallet A” or “Loose cartons, SKU 104” so each row can be traced back to the packing list.

The CBM formula and unit conversions

Convert the three dimensions to meters and multiply them to get volume per package. Multiply that figure by the row quantity, then add the resulting row volumes. This also works for a list that mixes centimeters, inches, and other units, because the calculator converts each row individually.

Cubic meters per package = length in meters × width in meters × height in meters

Shipment cubic meters = sum of (cubic meters per package × quantity) for each row

A millimeter is 0.001 m, a centimeter is 0.01 m, an inch is 0.0254 m, and a foot is 0.3048 m. If all three sides are in centimeters, multiply them and divide by 1,000,000. A cubic foot is exactly 0.028316846592 m³, so divide the cubic meters by that factor to get cubic feet. Changing a row’s unit converts its entered numbers. For example, 24 × 18 × 12 in becomes 60.96 × 45.72 × 30.48 cm and still describes the same volume.

The calculator keeps the entered precision through multiplication and addition. With 24 cartons measuring 100.01 × 50.01 × 40.01 cm, the underlying volume is about 4.802640456024 m³, shown as 4.80264 m³. Keeping precision matters for very small pieces as well. At one cubic centimeter each, 10,001 pieces add up to 0.010001 m³ even though each contributes only 0.000001 m³.

Worked examples

Eight small cartons and three large cartons

Eight cartons measure 60 × 40 × 30 cm and weigh 12.5 kg each. At 0.6 × 0.4 × 0.3 m, each occupies 0.072 m³. Multiply by eight for a row volume of 0.576 m³ and a gross weight of 100 kg.

Three cartons measure 50 × 50 × 50 cm and weigh 18 kg each. Each occupies 0.125 m³, so that row adds 0.375 m³ and 54 kg. The shipment combines to 0.951 m³, about 33.5842 ft³, and 154 kg gross across 11 packages. Choose “Try an example” to load these two rows and inspect the breakdown.

Small cartons: 0.6 × 0.4 × 0.3 × 8 = 0.576 m³

Large cartons: 0.5 × 0.5 × 0.5 × 3 = 0.375 m³

Total: 0.576 + 0.375 = 0.951 m³

Ten cartons measured in inches

Ten identical cartons measure 24 × 18 × 12 in and weigh 20 lb each. The dimensions multiply to 5,184 in³ per carton. There are 1,728 cubic inches in one cubic foot, so each carton occupies exactly 3 ft³. The ten-carton shipment occupies 30 ft³, or 0.84950539776 m³ before display rounding. The gross weight is 200 lb, equivalent to 90.718474 kg using 0.45359237 kg per pound.

Per carton: 24 × 18 × 12 ÷ 1,728 = 3 ft³

Shipment: 3 × 10 = 30 ft³

30 × 0.028316846592 = 0.84950539776 m³

Read a partial gross weight correctly

Gross weight is the weight of the ready-to-ship unit, including its contents and whatever packaging travels with it. Enter the weight of one package in each row. For eight cartons weighing 12.5 kg apiece, enter 12.5 kg and quantity eight. When pieces of the same size have different weights, split them into separate groups by weight so the total reflects the measured pieces.

If you know the weight of the eight small cartons in the first example and are still waiting on the three large ones, the volume stays at 0.951 m³. The result shows 100 kg known gross weight for 8 of 11 packages, with three weights missing. A blank weight leaves its pieces outside the weight total. The gross weight becomes complete when a valid weight is entered for every package type.

Share shipment details or keep an editable list

The shipment summary includes the totals and per-row details. This gives the recipient the individual dimensions, counts, and weight coverage they need to review the shipment. If a weight is pending, keep that note in the summary and update the recipient after weighing the remaining pieces. A combined volume alone leaves the shape and size of individual pieces unclear.

Use the CSV export if you want to reopen the list or revise it later. It records the original measurements, units, quantities, and weight entries. A spreadsheet’s copied cells can also be pasted as tab-separated rows. If an import reports an error, correct the indicated line and retry. Your current rows stay in place while the pasted list has errors.

Common errors that change the total

  • Mixing dimension units in one row. If you measured the sides in different units, first convert them to the same one. A 100 mm side entered as 100 cm is ten times too long.
  • Multiplying the sum of side lengths. Calculate and add the volumes of the individual pieces. Multiplying the shipment’s combined lengths, widths, and heights can count space across separate packages several times.
  • Using the carton’s net contents or pre-packing measurements. Recheck the finished unit after adding the outer carton, pallet, or wrapping. Re-measure if the packing plan changes.

Frequently asked questions

What does CBM mean in shipping?
CBM stands for cubic meter, a unit of volume. One CBM is the space inside a cube with sides that each measure one meter. Shipment CBM is the sum of the volumes of the packed units being shipped.
How do I calculate CBM from centimeters?
Multiply the outside length, width, and height in centimeters, then divide by 1,000,000. The result is cubic meters per package. Multiply it by the number of packages with those dimensions, and add the volumes for any other sizes.
How do I handle cartons with different sizes or weights?
Use a separate row for each combination of outside dimensions and per-package gross weight. For identical cartons or pallets, enter the count in Quantity. You can use a different dimension unit on each row.
Do I enter the cartons on a loaded pallet separately?
If the loaded pallet ships as one handling unit, enter the outside dimensions and gross weight of that entire unit, including the pallet, wrapping, and any overhang. Only put cartons on a separate row if they ship as separate pieces.
Can I calculate CBM without entering a weight?
Yes. Volume uses dimensions and quantity. If you enter weights for some package types, the result gives the known gross weight and the number of pieces it covers. A shipment gross-weight total appears when every package has a valid weight.
Can I convert CBM directly to kilograms?
There is no fixed physical conversion. CBM measures volume, while kilograms measure mass. Two packages can occupy the same space and have very different weights. Enter the measured gross weight of each packed unit to calculate a shipment weight.
Does total CBM tell me whether the shipment will fit in a container?
CBM measures volume. Loading also depends on each unit’s dimensions, the door opening, usable interior space, orientation, stackability, and payload limits. Keep the package breakdown for the carrier or loading planner.

Measurement references

Related shipping calculators